Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Dartington Description

Dartington Hive

Dartington Hive

The Dartington Long Deep (DLD) hive takes 14 x 12 inch and can take up to 17 frames. It is possible to have 2 colonies in the brood box as there is an entrance at either end. It has half size honey supers which take 6 frames can be used which are lighter than full supers and are therefore easier to lift. The Dartington originally developed by Robin Dartington so that he could keep bees on his London rooftop.

Choice of Hive

For those proposing to keep bees for the first time there is a choice of several hives. Those most widely used in Britain are British National Hive, Smith Hive, Modified Commercial Hive, Langstroth and Modified Dadant Hives. The basic feature common to all these hives is that they use rectangular wooden boxes, open top and bottom, which can be tiered one upon another, the first resting on a floorboard incorporating an entrance and the top one covered with a roof.

The frames enclosing the combs hang in the boxes. The combs in the lower part of the hive form the brood nest in which the eggs are laid by the queen and in which the resulting larvae are reared by the nurse bees. Above the box, or boxes, containing the brood nest are placed .boxes of combs for the storage of honey, as required during the season. Between the brood nest and the upper boxes (usually known as honey ‘supers’) may be placed a perforated horizontal screen (queen excluder) through which worker bees can pass but not the larger-bodied queen. The use of a queen excluder prevents the queen from laying eggs in the boxes provided for honey storage and facilitates removal of the honey at the end of the season. Whereas deep boxes with correspondingly deep combs are used for the brood nest, shallower boxes (supers) with shallower combs are usually used for honey storage. Sometimes, in order to give more room for brood rearing, a shallow box or a second deep box is added to the brood nest.

The hives described above take frames of different sizes. The frames most in demand from British manufacturers are, at present, the Standard British 14 x 81/2 in. deep and 14 X 51/2 in. shallow frames. With 1 ½ in. long lugs these frames fit the British National hive; if the hugs are shortened to 3/4 in. they are suitable for the Smith hive. These hives, like the others described, are single walled and suitable for large or small scale beekeeping. There are other hives, namely The WBC (double skinned) that look more decorative in a small garden apiary but with single walled hives management is simpler, the labour involved is less and the movement of whole apiaries for pollination or to heather moors becomes a much more practicable

To start with, a hive consisting of a floor, deep box and two or three shallow super boxes, inner cover (or crownboard) and roof should be obtained, together with a queen excluder. This will usually suffice for the first season, but it is useful to have a spare hive of the same pattern, with one deep box, in reserve in case it becomes necessary to house a swarm.

Frames can be bought completely assembled and fitted with foundation ready for use, but a cheaper alternative is to buy flat pack or self assembly along with sheets of wired foundation for assembly and nailing together at home.

The Beehaus

The Beehaus is the most modern beehive having been launched in 2009. It is based on similar principles to a Dartington. The top-bar or Kenya-hives were developed as a lower-cost alternative to the standard Langstroth hives and equipment. They are used by some devotees in the United States, but are much more popular, due to their simplicity and low cost, in developing countries. Top-bar hives also have movable frames and make use of the concept of bee space.

Warre Hive Description

The Warré hive was invented by Abbé Émil Warré, and is also called “ruche populaire” or “The People’s Hive” . The Warré hive is a modular and storied design similar to a Langstroth hive. The hive body is made of boxes stacked vertically, however it uses Top Bars for comb support instead of full frames. Popularity of this hive is growing among sustainable practice beekeepers. The Warre hive differs from other stacked hive systems in one fundamental aspect: when the bees need more space as the colony expands, the new box is “nadired”. i.e. positioned underneath the existing box(es). This serves the purpose of warmth retention within the brood nest of the hive, considered vital to colony health.

Top Bar Hive Description

The top-bar hive is so named because the frames of the hive have only a top bar, not sides or a bottom bar.

The beekeeper does not provide a foundation (or provides only a fractional foundation) for the bees to build from.

The bees build the comb so it hangs down from the top bar

This syle of hive is also known as the Kenyan Hive

The hive body is often shaped as an inverted trapezoid in order to reduce the tendency of bees to attach the comb to the hive-body walls.

Unlike the Langstroth design, a top-bar hive is generally expanded horizontally, not vertically.

The top-bar design is a single, much longer box, with all the frames hanging in parallel. Unlike the Langstroth hive, the honey cannot be extracted by centrifuging because a top-bar frame does not have reinforced foundation or a full frame.

Because the bees have to rebuild the comb after each harvest, a top-bar hive yields more beeswax but less honey.

However, like the Langstroth hive, the bees can be induced to store the honey separately from the areas where they are raising the brood.

Therefore, bees are less likely to be killed when harvesting from a top-bar hive than when harvesting from a skep or other traditional hive design.

Commercial Hive Description

Commercial hives are exactly the same external dimensions as a National hive, but instead of having a rebate the hive is a simple cuboid. Because of this the frames are larger and have shorter handles or lugs. The brood box is picked up using small hand holds cut into the external wall of the hive. Supers have this same feature, which can make them difficult to hold when full of honey. Some beekeepers therefore use National supers on top of a Commercial brood box.

WBC Description

Wbc Hive

The WBC, invented by and named after William Broughton Carr, is a double-walled hive with an external housing that splays out towards the bottom of each frame covering a standard box shape hive inside.

The WBC is in many respects the ‘classic’ ( Winne The Pooh ) hive as represented in pictures and paintings, but despite the extra level of insulation for the bees offered by its double-walled design many beekeepers avoid it due to the inconvenience of having to remove the external layer before the hive can be examined.